Household Whetstone

Single-sided whetstone, 3000#

Model : TG7300
Product Size : 180*60*14mm
Product Weight : 344g
Grinding Material : Corundum
Packaging : Color box
Certification :
Recommend Friends :

1540991620252788.jpg

1540991642374925.jpg

1540991659365291.jpg

1540991678902304.jpg

1540991696505437.jpg

1540991714197192.jpg

1540991734632885.jpg

1540991753438786.jpg

1540991773153763.jpg

1540991794441974.jpg

1540991816292739.jpg

1540991837165003.jpg

1540991858129498.jpg

1540991881291072.jpg

1540991911714365.jpg

1540991930576540.jpg

1540991951981548.jpg

  Product Features  

Quick sharpening abrasive

Clog free surface

Super fine quality stone

Silica gel non-slip base

  Sharpening Instruction  

1. Soak the stone in lukewarm water for a few minutes. As soon as the air bubbles stop rising the stone is ready for use. Please continue to apply water also during the sharpening.

2. Place the stone on a non-slip worktop and make certain that the surface is flat. Start by using the coarse grit (black side) of the stone.

3. Move the blade back and forth over the stone at an angle of 10 - 30 ° by using gentle pressure. Start at the tip of the blade, continue to the middle, and finish at the end of the blade. After a while you will notice a small burr at the edge.

4. Then move to the fine grit (green side) of the stone and repeat the process until sufficiently sharp.

5. Please rinse the stone and clean off the grinding residues. Please also clean your knife with hot water.

Tips:1. Suitable for use with water only, oil is not necessary.

2. The 10 to 30 degrees depending on the application:10°for filet knives, 23°for kitchen or pocket knives, and 30°for cleavers

3. Use the entire surface of the stone when sharpening. This will ensure even wear of the stone over time.

  Caution:  

Please be extremely cautious during the sharpening process to prevent any injuries.