Household Whetstone

single-sided whetstone, 240#

Model : TG7024
Product Size : 180*60*14mm
Product Weight : 290g
Grinding Material : Corundum
Packaging : Color box
Certification :
Recommend Friends :

1540990535331844.jpg

1540990554295381.jpg

1540990574785994.jpg

1540990592714594.jpg

1540990609103712.jpg

1540990626851006.jpg

1540990651594023.jpg

1540990669956262.jpg

1540990688124626.jpg

1540990706468772.jpg

1540990725799787.jpg

1540990744583042.jpg

1540990763370926.jpg

1540990784542924.jpg

1540990802550290.jpg

1540990822912859.jpg

1540990843825016.jpg

 Product Features  

Quick sharpening abrasive

Clog free surface

Super fine quality stone

Silica gel non-slip base

  Sharpening Instruction  

1. Soak the stone in lukewarm water for a few minutes. As soon as the air bubbles stop rising the stone is ready for use. Please continue to apply water also during the sharpening.

2. Place the stone on a non-slip worktop and make certain that the surface is flat. Start by using the coarse grit (black side) of the stone.

3. Move the blade back and forth over the stone at an angle of 10 - 30 ° by using gentle pressure. Start at the tip of the blade, continue to the middle, and finish at the end of the blade. After a while you will notice a small burr at the edge.

4. Then move to the fine grit (green side) of the stone and repeat the process until sufficiently sharp.

5. Please rinse the stone and clean off the grinding residues. Please also clean your knife with hot water.

Tips:1. Suitable for use with water only, oil is not necessary.

2. The 10 to 30 degrees depending on the application:10°for filet knives, 23°for kitchen or pocket knives, and 30°for cleavers

3. Use the entire surface of the stone when sharpening. This will ensure even wear of the stone over time.

  Caution:  

Please be extremely cautious during the sharpening process to prevent any injuries.